Trying a 3rd mix of paints to replicate SDERy Yellow.
Floquils "CSX New Image Gold" looks pretty good on #105, but I want to saturated it a little more and push it more towards yellow. The "Roof Brown" used for the trim is just too dark.
After experimenting a bit (above), I settled on a 50-50 mix of "Railbox Yellow" and "CSX New Image Gold" for the yellow, and a 50-50 mix of "Southern Freight Car Brown" and "Roof Brown" for the Mahogany trim color (outlined above).
Ooh! Not bad. Not bad at all. Compare to this poorly lit photo of old actual SDERy yellow. After letting this dry for a day, I'll hand paint the trim with the Mahogany brown mix.
After letting the trim paint dry for a day, its time to paint the roof. Some precision masking is required for the clerestory windows. I laid out a length of masking tape onto a piece of glass a tad longer than the length of the windows. After carefully measuring the width and length as well as where the curves start, I cut the mask to size with a sharp Xacto knife.
The mask is carefully worked into place. Then the rest of the car is masked off. This time I'll paint the roof Floquil "Mud". Its a little warmer than "Earth".
Well... my digital camera seems to be "rounding off". The yellows almost look to be the same here. But the differences are more discernible in person. But not that much more. On the other hand, the difference between "Earth" on #105 (right) and "Mud" on #107 (center) is more discernible in the photo than they are in person! As for the yellows, I'm so close. I'm probably splitting hairs at this point. Yes sir. Splitting hairs!