Read the Free Trolleyville Times Monthly for the Latest News on Prototype and Model Traction!

Monday, November 05, 2012

Junction Tower 3d Print from Shapeways

It's here! All the way from the Netherlands, My first 3D Print!

I don't remember the last time I felt this excited about finding a package left by UPS. Lets tear it open!

Whoops! I goofed on the dimensions. This is actually the right size for O Scale, not HO. No wonder is cost so much! Despite that flub though, this is very exciting. I've built hundreds of objects in the computer over my 20 year career, but this is the first time I've actually held one in my hand. The detail is all there, and it smells exactly like dirt! But unfortunately, as you can see, the post is warped. And I'm not sure why this happens or how to prevent it with future prints. Maybe the smaller (HO scale) size will eliminate that.

Here you can see the texture inherent in the layering process of 3D printing. This model was printed with Shapeways "White Detail" material.  Costs twice as much but it has a better finish than "White, Strong, and Flexible".

Okay, I've scaled the 3D drawings to the correct scale, and made some adjustments. There is a 1mm minimum thickness requirement, so I had to thicken up some of the details. This time I sent it off to Volkmars weapon of choice: i.materialize in Belgium. So we'll see what materializes. Yes sir! We'll see what materializes!

Dandy

6 comments:

  1. Its your call, but at this stage in the evolution of 3D printing, if I was doing it, I'd use 3D printing for the "fiddly bits", like the tower cabin and base, and use a piece of metal or plastic tubing for the quite straightforward column.

    You don't *need* to do the whole tower as a single part.

    Cheers,

    Bill

    ReplyDelete
  2. Great start, Dandy!
    Bill's right - you would be better off printing the cabin and base, and adding a piece of brass rod for the column. As a further suggestion, "print" the hole in the cabin and base for the rod to fit into - no drilling necessary!
    - Trevor

    ReplyDelete
  3. The nice thing about printing the post is that I modeled in the pilot holes for the grab irons up the post. They came out nice and straight. Something I find hard to do when adding grab irons to freight cars. I suppose a warped post is worse than crooked steps. Maybe I can make a drilling jig for the steps.
    Thanks so much for the input guys!

    Dandy

    ReplyDelete
  4. > Something I find hard to do when adding grab irons to freight cars

    BLMA (http://www.blmamodels.com/) makes a drilling jig for that..... at the princely sum of $4.00

    Cheers,

    Bill

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete
  6. (Oh my good, now I am my own Tag!)

    I would perhaps do another way :
    Part 1 - The roof with the entire cabin less the floor.
    Part 2 - The floor plus the entire post. Hollow post designed for recieving a long screw or small brass tube. Hollow structures are warping less than plain (and cost less :-))

    Volkmar

    ReplyDelete