Monday, January 26, 2009

SDERy "Mission Yellow"

Put on your pajamas. Brew yourself a pot of coffee. Make yourself really comfortable, and get ready for a real snooze fest monologue! For I present to you-
Dan D. Sparks thoughts on San Diego Electric Railway Mission Yellow!

When I was in my young 20s devouring historical photos, I remember a conversation in which it was suggested that black and white photos actually contain color information, we just need to figure out a way to extract that information. Now here we are over twenty years later and that technology seems not to have materialized. So here I am once again agonizing over historical photos trying to determine what color San Diego Electric Railway yellow is exactly. The 100+ years old black and white photos offering little clues. But, clues do exist.


Clues come in different forms. I know that they were yellow from early written accounts describing the new trolleys as being a “golden yellow”. Though I suspect some embellishment with the “golden” part, the delighted reporter’s feelings creeping into his story. But then again, maybe they were golden yellow. I also have come across the description “mission yellow”, but there were no standards then, as now, for naming colors. Paint manufacturers can pretty much name their colors whatever they want. And what one manufacturer calls golden yellow can differ from another manufacturer’s golden yellow. I’ve seen pictures of a Union Pacific streamliner where every car was a different shade of “armor yellow”!

Car 54, there you are!

Clues that can be gleaned from b&w photos are the tone of the color. In this photo of car 54, I’m willing to bet that the ladies blouses are pretty darn close to “virginal white”… white, white. I’m also willing to bet that Kodak was using its familiar Kodak yellow color for its advertisements as seen on the right side of the photo. So I know that car 54 is not white, and it’s not bright Kodak yellow. This photo seems to support the “golden yellow” description, a little darker yellow. We also have to consider fading. Bright colors were more difficult to achieve and maintain back then, they would fade fast, especially in the California sun, thus lightening the tone. But! These trolleys were work horses traversing these dirt streets day in and day out, day after day, rain or hot, dusty shine. So they were getting pretty dirty, thus darkening the tone! So in essence, they were getting grayer.

As a reminder to not over think it, check out this tonal range of yellow! From very dark, to medium, to practically white! I suspect SDERy Co., like any other company, wasn't overly consistent with their company colors.

And then there are the tinted postcards. The thing to remember about tinted postcards is that they were tinted by hand, by memory, in the studio, not on location. And, they used whatever bottle of yellow tint on hand, no attempt to match the color exactly in the interest of time and because well... nobody cares or would even notice if it didn't match exactly. These two tinted photos of SDERy double-decker car #1 (taken at two different locations but almost exactly the same angle) depict two different tints of yellow! Did one studio take more care in matching the color? And if so, which one?! So frustrating!

Another thing to remember about tinted postcards is that they too are subjected to fading and getting grimy with handling over time. So they too are getting greyer. Oh! And not to mention generational copies! These postcards are not only getting greyer, but then were scanned by I don’t know how good of a scanner or camera, in I don’t know what kind of lighting conditions (incandescent lights make things appear more yellow, while florescent lights push things more towards the green end of the spectrum, etc…), and then subjected to whatever sort of enhancement with Photoshop type of programs, and saved with I don’t know what kind of settings, and then finally ending up on your screen which looks different from my screen! ssSSOOoo frustrating!!

The ultimate is to find an actual paint manufacturer paint chip. While very rare, I have known it to happen (Last year with Tiffany refrigerator cars “moss green”.). But, unfortunately, not with the San Diego Electric Railway.

The next best thing is a well preserved car from the era. A San Diego antique dealer rescued three vintage SDERy class 1 cars from a home and made efforts to protect them. Though not well preserved, these cars are yellow. But did the home owner paint them that color? Hopefully the cars were protected from the elements and the yellow is genuine. I haven’t been able to determine which.

Car 54! Your still here!

I visited briefly SDERy 54 at the museum at Balboa Park, but no one there could give me any answers on the authenticity of the color they used. To me, the semi restored car 54 lacks the elegant color schemes that were typical of its era. But that might just be because they painted the whole thing yellow, where as I suspect that the trim and seats were originally the natural color of Mahogany. Very much similar to this authentically restored San Fransisco streetcar:

Now this is an elegant paint scheme! The chrome yellow with brown lettering and red numbers with a dark drop shadow on them. And the natural mahogany seats, nice. I bet this comes real close to what the old San Diego cars looked like.

Another surviving San Diego car is this car now at the Orange Empire Railway Museum in Perris CA. I have never visited this car, so a trip to the OERM would be prudent. But a few factors worry me about the authenticity of the yellow on this car. It was originally a Salt Lake car that was brought in, like many other cars from around the country, to help out with the war effort in San Diego. Is that SDERy yellow on the front? Or is that a remnant from its Salt Lake days? Or did someone else put that on there? And if it is SDERy yellow, how much of the orangy color is rust showing through the yellow? How badly has it faded? F-r-u-s-t-r-a-t-i-n-g.


George Huckaby of the Southern California Traction Club is the only one I know of that has ever painted a model in SDERy yellow. I asked George about it and he was kind enough to email me his recipe that he and David Garcia came up with:

"Floquil UP Armour Yellow (110066) – 10 parts; UP Light Orange (110068) – 10 parts; engine Black (110010 ) 1 part; I make no guarantees as to correctness. This came about based on my own research and opinions of railroaders who I respect. I used this color on my car. See enclosed photo" (above).

Okay, so that’s it for evidence and clues that I have. Now it’s time to make an educated guess. I’ve taken some Scalecoat brand yellow paint chips and took a look to see what they look like in gray scale. After comparing the color chips with the color (and colored) photos, and the gray scaled chips with the b&w photos, I’m thinking that the Scalecoat S43 Erie Lackawanna yellow is looking to be just about right.

I’m pretty confident with my choice. But I might change my mind when I actually see it on my model. I’ll have to take a look and then determine any adjustments. Then I will be absolutely certain of my choice. The only way to change my mind and make further adjustments is if someone comes up to me with some actual paint chips and proves me wrong. Yessir! Prove me wrong!

Monday, January 12, 2009

Birney Project ~ Final Brasswork

It’s about time to get this Birney painted! So I am trying to think of any last minute brass work that needs to be finished beforehand.

In a previous post I said I was going to let the bulb lighting the destination sign also light the interior. But I have since rethought that. The idea of a bulb just dangling there doesn’t sit well with me. So I fabricated a housing for the bulb lighting the destination sign. I simply used square tube stock and filed away the front. At the same time I gave it a curve so that it conforms to the curve of the front of the car. Then I drilled a hole for a round tube to slip into. The bulb slides through the tube and into the housing.


The two tubes on the left house the marker lamp bulbs. Next to them is the new housing for the destination sign bulb. And to the right of that, coming down from the ceiling, is the tube that will house the bulb for the route number sign on the roof of the car. That's a lot of bulbs, I hope this works. Yessir! I really hope this works!


The route number sign boxes on the roof of the cars are rather prominent, so I’m going to give modeling them a shot.


I started by carefully determining and marking the location of the sign. Then I drilled out a pilot hole through the roof and the ceiling.


The pilot hole is widened to accommodate the 3/16” tube, which is soldered into place.


Taking a square file, I filed through the front and the side of the tube. The bulb will reside in the tube, shining through these openings.


A Plastruct square acrylic tube is cut to length and a test fit shows that it fits perfectly over the brass tube. This photo shows the bulb mounting tubes from outside the car: the Route sign on the roof, the new destination sign housing, and the marker lamp housings.


An anonymous tipster (using the comments feature at the bottom of each of these blog posts) pointed out that Birney’s don’t have rivets on the front ends. So I filed those off. I tried to remove the retriever so that I could move it to the other side of the headlight, but it won’t budge. I’ll live with it. I also added security bars in the windows. These I soldered in, but next time I might just glue them in place. They had quite a reaction to the heat, warping them. I think the car is looking mighty pretty, so it’s off the paint shop for a fresh coat of SDERy “Mission Yellow”. But that’s a whole ‘nother story, Yessir! A whole ‘nuther story!

Dandy

Monday, December 29, 2008

Birney Project ~ Car Body

You know, if this project works out and the Birney performs well on the layout, I would most likely want to add more to the roster. But this time, instead of looking for an eBay basket case Birney, I think I would rather go with this resin Birney body offered by Miniatures by Eric. I haven’t seen these in person, but if you have, let me know what you think.

Seems to me that a body shell would be much more fitting for the complete overhaul that’s required on this project. And if Hollywood Foundry can work out the bugs and get its Birney mechanism released, then this project would be a definite go! Then I can build up a nice fleet of Birneys. Yessir! A nice fleet of Birneys!

Dandy

Monday, December 15, 2008

Birney Project ~ Painting and Detailing the Seats

Now that the seat assemblies for the Birney are built, it’s time to paint and detail them.

The trim color on SDERy equipment is brown, so I’m going to try out Scalecoat Roof Brown on the seats to see if it’s a good color for the trim.


Scalecoat is a high gloss paint, great for decals, not so much for seats. So I weathered the seats with some weathering chalk and then sprayed the seats with Testors Dullcoat to kill the shine. The seats on the left are freshly painted with Scalecoat, the seats on the right have been weathered and sprayed. After they have dried thoroughly, I can glue the figures in place.


I had to cut and file the feet off of the figures, not a natural thing to do! I also had to file some of the material off of their butts to get them to seat properly. None of this will been seen when the figures are riding in the trolley.


Once the figures are seated properly, I super glued them into place. The motorman I was able to leave fully intact since he sits higher and doesn’t have to deal with the mounting bar. Which is good because he is fully visible through the doors.



There! How’s that! Don’t quite notice the motor as much, hmmm? Yessir! Don’t quite notice the motor as much!

Dandy

Monday, December 01, 2008

Birney Project ~ Installing the Seats

Now comes the question "which direction is the trolley going?". Almost all trolleys are double ended. When they reach the end of the line the conductor simply walks down the isle and flops over the seat backs so that the seats are now facing the other direction, no need to turn the trolley.

But thats impractical on a model like this. If I permanently attach the seats to the trolley, then the car will have a definite forward / back. I'm going to try to mount the seats into an assembly that can be reversed from time to time, to help the motor maintain even wear. So I soldiered the seats to a bar of brass.

Notches are filed in the bar to clear the motor bolsters mentioned in the previous post. Also, a notch was carved behind the motorman's seat to clear the screw. These notches also help keep the seat assembly in place and prevents it from sliding around inside the car.


Because the floor of the model is higher than on the prototype, there isn't room enough for the legs of the seats. (Or for the passengers for that matter!!! Preiser actually offers plenty of legless passenger figures because this is a common occurrence with models!). So mounting the seats to a bar works out just fine.


I tried snapping an interior shot so that you can see how the seats fit around the motor. Difficult shot to get. I tried.


Here is how the seats look from the outside. Each seat will have a figure or two riding in them, filling the window and hopefully, distracting from the big ol' motor inside. Works for me! Yessir! Works for me!

Dandy

Monday, November 24, 2008

Birney Project ~ Fabricating the Seats

Despite the Bullant motor/drive mechanisms tiny size, it's still huge inside the Birneys interior, taking an unfortunate toll on the models see-through quality as seen in the prototype photo. There are a couple of options as to how to hide the motor. One common practice is to use frosted glass in the windows. But I'm going to keep the glass clear and try to distract the viewers attention from the motor by surrounding it with interesting details. Lots of colorful passengers looking out the windows will hopefully help the black motor disappear into the shadows.

First off, I measured the motor to determine how much of the interior its going to eat up. Birneys came in different sizes and configurations, but generally they were 8' wide with 36" seats and a 24" isle. As you can see in the blueprint I drew, the motor takes up the whole isle and half the seats. But thats all right. There is enough seat left to seat passengers on, thus distracting from the motor!


I'm going to make the seats from brass stock. Styrene would be a lot easier and faster to work with, but brass will add heft to the model, helping with performance. I started with a 1/4" x .032" brass bar. I lightly filed the sharp corners to round them a bit, to make the seat back appear plush.

NorthWest Short Lines press bending break "The Bender" is used to bend the brass. This works quiet well, especially when used correctly! I made most of the seats the hard way until I realized I was doing it wrong. Note to self: review instructions.

The bend should be less than 90 degrees, to give the seat that reclining look.


Then cut the seat from the brass stock. I didn't bother rounding the seat cushion, it'll never be seen. Repeat above steps until enough seats are made.

The front seats and back seats are clear of the motor, so I built them full size. This should help rap details around the motor. I fabricated the motorman's seats from more brass bar and tube stock. These seats I left pretty rough. I didn't want to fuss with detail that will never be seen. Notice also that in the second window you can see a screw protruding from the floor about where the motorman's chair is going to be. Also, the motor bolsters (also seen through the windows, they have the number "20" embossed on them) also protrude from the floor. These are a problem. I'm going to have to work the seats around these. Yessir! Gonna have to work around these!

Dandy

Monday, November 17, 2008

Birney Project ~ Darn It All To Heck!!!

The close proximity of the two trolley pole mounting holes are causing the trolley pole bases to interfere with each other. As usual, I found this out the hard way.

So I found these poles where the base is facing the opposite direction! Perfect! Problem solved.



Whoops! Somethin' wrong here. These poles were designed for PCC cars and I think that the roof of PCCs curve down where the poles attach, angling the pole. So the upward angle of the base (which would be level on a PCC) prevents the pole from laying flat on the Birney car. It can’t reach the hook! Dang it! So it’s back to finding a suitable pole. This can’t continue for too long because poles are expensive!!! (I can’t return these poles because I had to trim the bushings to fit the Birney.). These setbacks are really blowing my modeling budget. Dang it! Yessir! Dang it all the heck!!!





Monday, November 10, 2008

Birney's In The Movies!

It's Birney mania I tells ya! Birney trolleys are now showing up in a theater near you!

Changeling, Directed by Clint Eastwood, with Angelina Jolie and John Malkovich, out in theaters now, features Birney trolleys throughout the movie!


I hope I don't spoil it for you but, the trolley is actually a replica riding on rubber tires! The same technique was used on “Who Framed Roger Rabbit” that also featured Pacific Electric streetcars. in early Los Angeles.

Here is a rubber tired Roger Rabbit trolley parked on the side of the road waiting for its close-up.

Rubber tires because tracks are long gone from the streets of LA. Todays trolleys run on separate right-of-ways. So production crews have to lay "track" for the movies. Bill Volkmer photos.

The Changeling production crew built their Birney based on the design of an authentic surviving Pacific Electric birney car #331 and sister car #332, now residing at the Orange Empire Trolley Museum in Perris, California.   I'm afraid I didn't have my facts straight dear followers. My sincerest apologies. The car used in the shoot is in fact an actual Birney! According to John Smatlak's report at http://groups.yahoo.com/group/TrolleysCA/message/8362:
The Birney car wasn't from OERM, but rather "Omaha Lincoln & Beatrice #4, (Brill 1926, order #21021, info from Frank Hicks). It's on rubber tires for filming of The Changeling at the San Bernardino depot (seen in the background) and at other locales. OERM loaned seats and other interior furnishings for the car, along with the complete mainline steam train mentioned previously."




During location shooting in Pasadena, local resident David Johnson was on hand to take these videos of the “trolley” providing “background” for a shot.



With the movies fantastic period costumes and authentic automobiles, and with a little Hollywood movie magic, one could escape reality for a couple hours and enjoy a nostalgic trolley ride through 1920s Los Angeles on a Birney car. Yessir! A nostalgic ride on a Birney car!

Dandy


Monday, November 03, 2008

Birney Project ~ Darn it!

With the motor installed, the next step is to get it hooked-up electrisicle wise. That means installing the new trolley poles.

The insulating bushings that came with the poles are too big for the existing holes in the Birney. So I had to drill them out so the bushings would fit. Easy enough.

Then I popped in the poles and wouldn't you know it... the trolley pole bases are too long! They are overlapping each other! Darn it! Ah- Dang it! I had no way of knowing beforehand. Aw shoot! And I drilled out the mounting holes! Oh phooie! Now I have to order different poles! Dang it man, how long is that gonna take?! Darn it! Darn it! Darn it!


Yessir! Darn it!

Monday, October 20, 2008

Birney Project ~ Installing the Bullant

Easier said than done. Somehow I have to install the new Bullant drive mechanism where the old motor is now.

I have no idea how I'm going to do this. So, as usual, I'm just going to have to take it one step at a time. Yessir! One step at a time.

The first order of business is to remove the old motor and see how the Bullant relates to the frame. First off, its apparent that the Bullant will not slip right in. The wheels prevent dropping in the mechanism down from the top, and the bolsters prevent it from coming up from the bottom. So somethings got to give.

Looks like I have four choices at how to do this. 1- build a new frame, as Bruce Battles of Menlo Park, CA seems to have done with this single truck streetcar ( I don't know Bruce or how to contact him, If anyone knows this guy, I sure would like to correspond with him about his modeling, and probably ask permission to use above photo ~ eep!). Or 2- modify the existing frame. Or 3- mount the Bullant directly to the Birney shell. Or 4 – glue the truck side-frames to the polystyrene side-frame supports on the Bullant, and then mount the side-frames to the trolley body.

As you can (barely) make out in this photo, the mounting bolsters of the Bullant are actually higher than the top of the chassis frame. So options 3 and 4 are out. But if I could just slide in the Bullant into the chassis frame, then the mounting bolsters could be mounted from the top.

So as you can see, I decided to modify the frame (Option 2). If I mess it up, then I'll simply build a new frame (Option 1). I cut a piece of the frame out so that the Bullant could just slide in. This kind of compromises the integrity of the frame, but note that the mounting holes are on either side of the cut, so when bolted in place on the Birney body, things will be rigid again.

And sure enough, the Bullant slipped right in!

Whoops! Things are sitting kind of high. The Birney body needs to sit lower so that the center of the side-frames are equal to the center of the wheels. More fiddling needs to be done. But we're getting there Huh? The Bullant is in there!


Spacers between the frame and the bolsters will raise the Bullant / lower the Birney body, so I cut some from brass stock and soldered them to the frame. Now this is funny; I wanted to screw the Bullant to the spacers so the Bullant could be removed from the frame. But while I was trying to center the mounting holes so I could mark their location for drilling, things kept sliding around. So I temporarily super glued the Bullant in place. Well, the super glue has worked so well, I think I'll just go with it for a while. Yessir! Just go with it for a while!


I did it! I actually pulled it off! The Bullant is in there, and its in there solid! I'm just so proud of myself. I wish I could test it. What I need to do now is build a test track. Yessir! I need to build a test track!

Dandy